|
|
|
|
|
PA 168X IAX2 FXS Gateway Feature
PA168X IAX2 FXS Gateway is a standard-based VOIP feature TA, works with all standard compliant
ASTERISK SERVER and IAX2 terminal.
According with customer request, provide single port Ethernet or multi-port Ethernet model product and support PoE (802.3af)model product.
ITU Standards
G.711a/µ; G.723.1 5.3/6.3k;G.729,a,b,ab;GSM610;iLBC Compression.
G.165/G.167 16ms acoustic echo cancel (AEC)
Voice activity detection (VAD), Comfort noise generation(CNG)
Configurable jitter buffer (Maximum 32 voice frames)
Accord with ITU-T standard signal tone
DTMF generation and detection
E.164 dial plan and customized dial rules
|
|
|
IEEEand IETF protocols
802.3 /802.3 u 10 Base T / 100Base TX
IAX2(Inter-Asterisk eXchange V2)
TCP(RFC793)
IP(RFC791)
UDP(RFC768)
ICMP(RFC792)
ARP(RFC826)
SNTP(RFC2030)
Telnet(RFC318)
HTTP(RFC2616)
DHCP(RFC2131)
FTP (RFC959)
TFTP (RFC1350)PPPoE(RFC2516)
DNS(RFC1034,RFC1035)
RTP or RTCP(RFC1889)
Firmware Feature
IVR Voice prompt (Chinese, English, Japanese, German, French,Spain,Italy)
Multilingual WEB UI (Chinese,English,Japanese, German, French,Spain,Italy)
Support In-band audio used to DTMF relay
CID display used to FSK
100 entries for speed dial
Hotline
Support adjustable user password and super password
|
|
|
Setting and Upgrade
HTTP
Telnet (CLI)
HTTP;FTP;TFTP centralized configuration and upgrade
Processor
PA1688PQ
50MHz 8051compatible controller
50MHz AD2181compatible DSP core
Memory
2MB (1 x 16M) SDRAM
2MB Flash ROM
|
|
|
LAN Ports (1 or 2)
1 RJ-45 port(10M) or 2 RJ-45 ports 10/100M auto detection(only multi-port model)
FXS Interface
1 RJ-11 analog telephone Interface
Ringing Voltage 50V(RMS)
Ringing Frequency 25HZ
Loop Current 23mA
balance impedance 600¦¸(programmable impedance)
Optional External PSTN Interface
An optional RJ-11 interface enables the Pa168X H323 TA to access PSTN(only PA168V model)
LED (4)
Power, network , state and voice message indication.
|
|
|
Operating Environment
Temperature: 32-104° F (0-40° C)
Humidity: 20%-90%,non-condensing .
Power Requirement
External power adapter, Input 100-230V AC, Output 9VDC, 400mA or 1000mA
PoE(only support 802.3af model)
Regulatory Approvals
UL 1950, C/µL
CSA C108.8
CE
VCE EN60950
FCC Part 15 Class B
CISPR 22 Class B
CCC
|
|
